Sunday, November 05, 2006

Time for a feed

Some further progress this morning:
  • A number of extra feeds were soldered in place on boards 2 and 3.
  • 4 x 8mm holes were drilled in board 4 ready for the control panel and the M8 bolts. assembled with washers (2 on bottom, 10 on top - to allow for the panel to slope down) were put together.
  • A couple of bits of cork were cut away.
  • Almost all the rest of the holes in the baseboards were drilled ready for feeds.
  • The buzzbar on board 4 was split into 4 pieces ready to take various feeds.
  • We ran out of wire! More was ordered.
Tonight will be spent working out the rest of the wiring diagrams (particularly for the panel) and then work can start on installing LEDs... (which can be done inside out of the cold, dark, wintry nights!)


No comments: